Baitcasting is a fishing technique where you cast out a weighted lure or hook into the water and then retrieve it back using a rod and reel.
The amount of line you use depends on the type of fish you want to catch.
Baitcasting is a great way to target specific types of fish. If you’re looking to catch bass, you’d probably want to use a heavier line.

On the other hand, if you’re after trout, you might choose a lighter line.
To determine the correct length of line, you should consider the size of the fish you plan to catch.
For example, if you’ve got a largemouth bass, you’ll want to use a long line. However, if you’d like to catch smallmouths, you may need to go with a shorter line.
When choosing your line, make sure that it has enough weight for the job. You don’t want to end up with a heavy line that will sink too quickly.
When casting, make sure that the line isn’t dragging in the water. This can cause problems when trying to pull the line back through the water.
Instead, try to keep the line tight against the side of the boat so that it doesn’t get snagged on debris.
If you’re new to baitcasting, you may find yourself struggling to control your line as you cast. To help improve this skill, practice casting while holding onto something firm.
This could be a pole or even an anchor rope. By doing this, you’ll learn how to properly hold the line during casting.
General Idea
When filling a baitcasting reel, you should leave about 1/8th of the space between the line and the spool.
This will ensure that when you pull back on the handle, the line will be tight and won’t slip off the spool. A high-quality line will also help the reel cast better.
The sweet spot for your fishing reel should be around 120 yards. You want to use a braided line for your main because it won’t stretch as much as other lines.
What Type Of Line Should I Be Using On My BaitCaster?
You can choose between 3 types of fishing lines: Fluorocarbon, monofilament, or braided. Your mainline should be braided.
Fluorocarbon is recommended for floating leaders. Mono is recommended for sinking leaders. Braided line is tough, lasts longer, and is more sensitive.
Fluorocarbon is used for fishing because it sinks faster than other types of lines.
Baitcasting reels are not designed for holding very thin lines. You should use a heavier line instead.
Monofilament
A monofilament fishing line is great for beginners because it is easy to use. You can cast your lure without having to worry about getting tangled up or running out of line.
A thicker line is better than a thinner line because it won’t run out when casting. The monofilament fishing line isn’t as thick as braid, but it still works well.
You’ll need more of it, though.
Braided
The braided fishing line definitely has some advantages over the mono-line, such as being much thinner. You need to use a high-test braided line for this reason.
However, braided lines are thinner than monofilament, so you’ll need to buy a heavier reel. If you’re willing to pay extra for braided lines, then it’s worth it for deep-sea fishing.
Why Should I Put A Braided Line On My BaitCaster?
Braided lines are very durable and last longer than monofilament or fluorocarbon. They also don’t get tangled as easily.
They’re harder to fish with, however, since they aren’t flexible enough to wrap around a branch.
With a braided line, it feels like a high-end rod. It casts better than any other type of line. Fish can’t bite through it.
It’s easier to fish with and less likely to break. You won’t be getting snagged on things.
Is A Backing Necessary On My BaitCaster?
Bait casters use a backing to hold the line in place. The backing is also called a leader. Why put it on then?
You don’t want to make your line too tight, or else it’ll be very difficult to pull out when you’re done. Try to use as few wraps as possible.
Make sure your line is wrapped around the spool tightly but not too tight.
How Does A Line Be Attached To A BaitCaster?

You need to make sure your reels are well maintained. Clean them regularly. Make sure your guides are properly tightened.
And remember to wrap the line around the spool the same as it came out of the box.
After that, you’ll want to tie your braid to the backing.
Make certain your line is fed through the bottom guide, so it goes straight, and then fill the spool until there’s a 1/8 inch space (be sure to keep pressure on the line as it comes off).
The final step is to connect the leader line to the braid. Anywhere from 6 to 9 feet should do. We prefer having it, so the knot isn’t quite going into our spool.
This ensures there’s no friction or anything gets stuck when you’re making a cast.
You should always use a braided line on your casting reel. A braided line is easier to tie onto the spool than fluorocarbon or mono silicon lines.
To make sure the line doesn’t slip out of the reel, we suggest tying a knot called an arbor knot. This knot helps to keep the line from slipping off the spool.
Make sure the line isn’t too long because if it is, it might slip off the spool.
A mono or fluorocarbon rope is tied to a braid. The tag is removed close to the knot. The handle of the reel is turned to wind up the line.
The line should be run between your fingers and thumbs until it is straight.
What Happens When Too Much Line Is Attached?
There is one huge problem that will happen if you use too much line on your fishing reel. You’ll get knots, tangles, or big problems cleaning up after casting.
Don’t use too much line on this reel! Reels should be thrown away if there is any chance of them getting caught in machinery or other equipment. This includes fishing reels, too.
How Many Yards Of Line Should Be On A BaitCaster?
You should always leave enough room between the line and the spool when you’re fishing. This prevents the line from getting caught up in the spool when you pull back on the rod.
On the other hand, if your line is too thin, you won’t be able to run a long distance. You might only be able to run up to 100 yards.
When you’re using a new reel, you should start by testing it out with a few practice lines before you cast off.
You’ll need to do this because the first couple of times you use a reel, you won’t know how many lines you want to use.
So, if you get too much line on the reel, you could end up wasting some of your bait! First, see the instructions for attaching lines to reels.
Fixed Spools Or Spinning Reels?
The amount of line on a reel should be even with the edge of the spool, but not too close to it. A spool should always be filled up to the maximum capacity of the reel.
This helps to prevent the loose line from spilling over.
Spools should never be under-filled because this creates friction when the line is being pulled out of the reel. This friction causes the line to get tangled.
A sharp edge of the spool causes less friction than a blunt edge. As the line peels off the sharp edge, the line creates friction with the spool, reducing the casting distance.
Regular applications require a slightly shorter spool than heavy applications. Light applications need more lines than heavy applications.
There is less chance of getting tangled lines when using regular applications.
There are some tricks worth knowing about how to load up the right amount of light line on a fixed spool reel. First off, check whether your reel is supplied with a shallow spindle.
This can save a ton of work (and money spent on the fishing line!) for you to have the ability to fill your spool.
Buying a custom-designed shallow-spindle reel or bulking out the spool on your existing reel.
If you do not have a shallow spindle (and you want to use a fine line), you will be required to bulk out the spool.
One method of doing this is to wrap electrical tape around the spool to fill up the spindle.
When your spindle just has enough room left to house your fine line, you may wind on the line you really intend to fish with.
Final Thoughts
As you can see, there are many aspects to consider when choosing a fishing reel. The most important thing to remember is that you must choose a reel that fits your needs.
If you don’t like the way a particular reel feels, then you shouldn’t buy it. It’s all about finding what works best for you.
To determine how many lines you need to put on your bait caster, you need to determine what type of fishing line and reel you’ll be using and any other factors.